väripesu white wash ohjeet.
Posted by frenchicfinland Admin

WHITE WASH - TECHNIQUE GUIDE

Color wash - “White Wash” instructions - here’s how:

Sometimes you may simply want to lighten a wood surface, log wall, paneling, or piece of furniture that has yellowed over time. 

This technique leaves the wood grain visible and uses very little paint!

You can use any color for this technique, but white or light cream and sand shades are most commonly used. How would a color wash made with black or red paint look?!

Try it out and experiment first.

Color washing gets its name from “washing” a piece of furniture or a surface with a thinned paint-and-water mixture, then wiping off the excess.

Color washing is suitable for bare or sanded wood surfaces, such as furniture, paneled walls, log surfaces, and ceilings.

With this technique, the wood grain remains beautifully visible.

Let’s get started

  • First protect the floor beneath the furniture.
  • With this technique, the thinned paint is runny and may splatter.
  • Set aside lint-free cloths for wiping, a container for mixing the paint, and a mixing stick or whisk. 

Thin the paint generously in a separate container.

  • A milky consistency is ideal. Brush/wash the furniture’s surface with the mixture, then wipe off any excess that has not soaked into the wood.
  • Start with a ratio of 50% water and 50% paint. Brush the thinned paint onto the surface.
  • Repeat to achieve the desired result and shade.
  • Each repeat adds more color and evens out the result. You can also affect how much color soaks in by increasing the time between brushing it on and wiping it off.
  • Let each coat soak into the wood for 15-30 min before wiping it off and applying the next coat.
  • This technique works best on a clean or sanded wood surface, where the thinned paint mixture can soak into the furniture’s wood. This technique does not work over old paint.
  • With this technique, the finish is often full of character, because the paint mixture is absorbed into the wood unevenly and to different depths, depending on the density of the wood grain.
  • However, remember that you can’t achieve a translucent white finish on old, dark wood without carefully sanding the surface, and this technique can’t be used on a varnished surface.

Try these light shades for the 'white wash' technique:

  • off-white from the Al Fresco range: Cream Dream, or beige Fennec

  • pure white Whitey White from the wall paint range for lightening large wall and panel surfaces, for example orange-toned log surfaces

  • sand-colored Smoke Signal

There are no rules with this technique either - you can get creative with your choice of shades and furniture - the result is a stunning effect finish.

Tip: If you want to lighten, for example, a sanded kitchen countertop that gets heavy everyday use, use the 'White Wash' color-wash technique rather than white wax.

You can apply white wax over the color wash as a final step.

Tip! Don’t thin the paint in the paint tray. Thinned paint won’t keep for long. Use a separate container with a lid for thinned paint.

Choose supplies for your project and browse the image gallery